User Manual

Crelling Harnesses For Disabled Ltd.
12 Crescent East, Thornton-Cleveleys, Lancashire, FY5 3LJ
Tel: [phone] Fax: [phone] Email: [e-mail] Website: www.crelling.com
Model 28 can be used on both single & bench seats.
It can also be used with Booster Seats & Cushions.
Fits most types of vehicle seang including single,
bench seats & some child booster seats.
To t the harness access is required between the seat
back and seat cushion to fasten the xing straps
vercally around the back rest.
IMPORTANT:
This harness is not classed as a safety harness.
The vehicle safety belt MUST be worn over the top of our
harness unless they are exempt for medical reasons.
ONE SIZE ONLY - 4 Years to Adult
(Approx. 15 Kg Upwards)
This harness will accommodate :-
• Young children using some High Backed Booster Seats
(e.g. Britax Adventure - see below)
• Children using Booster Cushions
• Passengers above 135cm who are able to sit directly
on the vehicle seat.
Model 28 Steel
Designed to oer postural support and a certain degree of restraint to children and adults
to keep them in an upright sing posion.
All our range of children’s vehicle harnesses can
be used in conjuncon with booster cushions
Booster cushions
Booster Seats
IMPORTANT: Our harnesses must NOT be used with child car seats already ed with the 5 point harness.
• The model 28 harness is ed directly onto the vehicle seat rst, prior to ng the high backed booster seat.
• The high backed booster seat is then ed onto the vehicle seat.
• The shoulder straps and waist belt of the Crelling harness are then brought around the booster seat.
• The shoulder straps should slot between the shoulder of the booster seat & the head rest.
• The harness is now ready for the child to get into.
• Place the child into the booster seat & fasten the harness according to the Model 28 ng instrucons.
• Once the child is securely & comfortably fastened in the harness, fasten the vehicle seat belt over the top of our
harness ensuring that it passes through the ‘belt guides’.
• Please ensure that the high backed booster seat is ed according to the manufacturers instrucons & the head rest
is adjusted correctly. A properly adjusted headrest ensures the opmum distribuon of the diagonal belt & provides
your child with the desired protecon and comfort.
Model 28 - will t both single and bench seats, as long as there is access between the seat cushion
& back rest of the vehicle seat to pass the xing straps vercally around the back rest.
The Model 28 harness can be used on some high backed booster
seats with height-adjustable headrests, which extend to grow with
the child such as the Britax Adventure.
Some of our customers have found that they work very well together
oering postural support or extra security for those with learning
dicules.
Britax Adventure
15 to 36kg (approx. 4 to 11 years)
Height-adjustable
headrest
IMPORTANT: This harness is not classed as a safety harness.
The vehicle safety belt MUST be worn over the top of our harness unless they are exempt for medical reasons.
The combinaon of the exisng safety belt & the secondary harness oers added security for the passenger.
The waist belt on this harness
is ed with a Steel Safety
buckle for those passengers
with inquisive ngers that
can undo the press release
buckle.
Cat. Ref: 28SB
Oponal Extra
A Houdini Stop can be ed to this harness.
This chest strap ensures the passenger stays safely
and correctly posioned within their harness.
It simply clips on to each shoulder strap of the
harness to help prevent the passenger from
separang the shoulder straps in order to escape.