User Manual

General maintenance of our belts & harnesses
Before each use check that the belt or harness is in a satisfactory condition
and is appropriate for the user.
Ensure that all belts and harnesses are fitted, adjusted and used correctly.
It is also very important that they are maintained & cleaned in accordance
with the instructions below:
 We strongly advise that a carer, O.T. or G.P. etc. Who is familiar with the
patients requirements is consulted prior to the selection of a harness.
The clients condition together with the type of seating/equipment is most
important in choosing the most suitable belt/harness. An inappropriate
selection may prove uncomfortable or harmful for the occupant.
 Please refer to the appropriate fitting instructions for each model of belt or
harness. These are enclosed with every harness.
Additional copies are available upon request.
 Regularly inspect the belt or harness for damage, wear or malfunction.
If any problems are identified replace it immediately.
 Belts and harnesses should be replaced if they show any sign of fraying or cuts.
 Regular checks are also necessary to assess the harness is still meeting the needs
of the user as over time these needs may change.
 If the equipment was used during an accident, it should be replaced
immediately.
 Avoid contact with corrosive liquids and keep the webbing away from sharp
edges.
 If storing a harness with a PVC/Leatherette chest or back pad, do not fold.
This may create creases which could cause discomfort to the passenger.
 Do not attempt to modify the equipment,. Any modifications to our belts
or harnesses will void the warranty.
 If there is any query or problem with the suitability of the product, please
do not hesitate to contact us.