Houdini Harness Model 28 Installation and User Manual IMPORTANT! Scan to watch a video on the correct way to install this Houdini Harness IMPORTANT CONSUMER INFORMATION NOTICE: This manual contains important instructions that must be passed on to the user of this product. Please do not remove this manual before delivery to the end user. SUPPLIER: This manual must be given to the user of this product. USER: Before using this product, read entire manual and save for future reference.
Booster cushions All our range of children’s vehicle harnesses can be used in conjunction with booster cushions Booster Seats IMPORTANT: Our harnesses must NOT be used with child car seats already fitted with the 5 point harness. Height-adjustable headrest Britax Adventure 15 to 36kg (approx. 4 to 11 years) • • • • • • • • The Model 28 harness can be used on some high backed booster seats with height-adjustable headrests, which extend to grow with the child such as the Britax Adventure.
Model 28 Press Designed to offer postural support and a certain degree of restraint to children and adults to keep them in an upright sitting position. Fits most types of vehicle seating including single, bench seats & some child booster seats. ONE SIZE ONLY - 4 Years to Adult (Approx. 15 Kg Upwards) To fit the harness access is required between the seat back and seat cushion to fasten the fixing straps vertically around the back rest.
Model 28 Steel Designed to offer postural support and a certain degree of restraint to children and adults to keep them in an upright sitting position. Fits most types of vehicle seating including single, bench seats & some child booster seats. ONE SIZE ONLY - 4 Years to Adult (Approx. 15 Kg Upwards) To fit the harness access is required between the seat back and seat cushion to fasten the fixing straps vertically around the back rest.
Model 28 Fitting Instructions 1. If fitting a brand new harness, remove any Rubber Bands & unfasten the two Vertical Fixing Straps [a]. 2. Holding the two Aluminium Bar Buckles [b] (attached to the upper section of the Vertical Fixing Straps) place the back pad of the harness against the front of the seat back & place the Fixing Straps up & over the seat back. [a] Vertical Fixing Strap [d] Shoulder Strap [e] Waist Belt Buckle [b] 50mm Aluminium Bar Buckle [f] Understrap [c] 50mm Sliplok slide 3. 6.
50mm Aluminium Bar Buckle Webbing is threaded through the sliding bar buckle Sliplock Slide Loose ends of webbing are often passed back through these slides to prevent slippage & to prevent the Fixing Straps from loosening during transit. Steel Safety Buckle This buckle has proven extremely successful when fitted to our harnesses as an alternative to the standard ‘quick release’ buckle. There is a knurled sliding bar for adjustment designed to prevent webbing slip.
Model 28SB
Terms & Conditions General We reserve the right to change these Terms and Conditions at any time. It is your responsibility to read the Terms and Conditions each time you visit the web site and your use of the website will be deemed as your acceptance to be bound by the latest Terms and Conditions.
Cancellations If you should decide to cancel your order, please advise us as soon as possible. We will also require confirmation of the cancellation in writing (email, letter or fax) giving us your purchase order details (including official Purchase Order No. where applicable). If the cancellation is advised to us after the order has been despatched, you will be responsible for any courier/postage charges for its return. NB.
Privacy Policy Crelling Harnesses Ltd. does not disclose any information on its customers to any third party on any occasion. Please see our Privacy Policy for further information. Guarantee All our products are fully guaranteed for 12 months from the date the goods are supplied.
Care & Maintenance Instructions Please read instructions carefully before fitting and follow them for correct use. If there is any query or problem with the suitability of the product, please do not hesitate to contact us. Retain these instructions for future reference. It is most important that the operating & maintenance instructions are kept with each harness. Especially if being transferred to new users. Additional copies of these instructions are available on request.
General maintenance of our belts & harnesses Before each use check that the belt or harness is in a satisfactory condition and is appropriate for the user. Ensure that all belts and harnesses are fitted, adjusted and used correctly. It is also very important that they are maintained & cleaned in accordance with the instructions below: We strongly advise that a carer, O.T. or G.P. etc. Who is familiar with the patients requirements is consulted prior to the selection of a harness.
Washing Instructions All webbing and components can be cleaned by hand as necessary. HAND WASH ONLY . Do not machine wash or tumble dry. Please use warm soapy water (up to 70/80˚) and a clean soft cloth. Mild detergent, anti bacterial wash, disinfectant or a mild spray disinfectant can be used - but do not use products containing bleach. Rinse with clear water, and allow to air dry. IMPORTANT: when cleaning or disinfecting do not immerse buckles in disinfectant or water.
Special Needs passengers should never be left unattended whilst using any item in our range. Belts, harnesses or products should only be used whilst under the constant supervision of a parent, carer or guardian. IMPORTANT: Our range of harnesses are not classed as safety harnesses. The vehicle safety belt MUST be worn over the top of our harness unless they are exempt for medical reasons. The combination of the existing safety belt & the secondary harness offers added security for the passenger.
Distributed by Medifab Ltd 32 Detroit Drive Rolleston 7675 New Zealand +64 3 307 9790 solutions@medifab.com www.medifab.
