User's Manual

HBM: Business Document

5.7.4 Stator antenna

The cable connection between stator antenna and evaluation unit is realized

with a coaxial cable.

NOTE

• When you connect the stator antenna, please take regard to a stress

relief

• Please tighten the connection screws with the appropriate tightening

torque.

• Use thread locker (medium strength, e.g. LOCTITE No. 242) to glue the

screws into the counter thread to exclude pre-stressing loss due to screw

slackening.

• Allign the stator like shown in the picture below

Fig 5.5: Axial Alignment