User's Manual
Table Of Contents
- T40FM
- T40FM
- English
- 1 Safety information
- 2 Markings used
- 3 Applications
- 4 Structure and Mode of Operation
- 5 Mechanical installation
- 6 Electrical Connection
- 7 Shunt signal
- 8 Functionality testing
- 9 Loading capacity
- 10 Maintenance
- 11 Waste disposal and environmental protection
- 12 Dimensions
- 13 Order numbers, Accessories
- 14 Specifications
- 15 Supplementary Technical Information
- English
- T40FM
- Deutsch
- 1 Sicherheitshinweise
- 2 Verwendete Kennzeichnungen
- 3 Anwendung
- 4 Aufbau und Wirkungsweise
- 5 Mechanischer Einbau
- 6 Elektrischer Anschluss
- 7 Shuntsignal
- 8 Funktionsprüfung
- 9 Belastbarkeit
- 10 Wartung
- 11 Entsorgung und Umweltschutz
- 12 Abmessungen
- 13 Bestellnummern, Zubehör
- 14 Technische Daten
- 15 Ergänzende technische Informationen
- Deutsch
Mechanical installation
T40FM A3276-8.0 HBM: public 29
Important
Keep them in a safe place for future dismounting.
5. There are relevant tapped holes on flange B for con
tinuing the shaft train mounting. Again use screws of
property class 10.9 and tighten them with the pre
scribed torque, as specified in Tab. 5.1, Page 30.
Important
Use a threadlocker (medium strength, e.g. LOCTITE) to
glue the screws into the counter thread to exclude
prestressing loss due to screw slackening, in the event of
alternating loads.
Notice
Comply with the maximum screw-in depth as per
Tab. 5.1, Page 30. Otherwise significant measurement
errors may result from torque shunt, or the transducer
may be damaged.