User's Manual
Table Of Contents
- T40FH
- T40FH
- English
- 1 Safety instructions
- 2 Markings used
- 3 Application
- 4 Structure and mode of operation
- 5 Mechanical installation
- 6 Electrical connection
- 7 TEDS transducer identification (Option 3, Code PNJ)
- 8 Shunt signal
- 9 Functionality testing
- 10 Load-carrying capacity
- 11 Maintenance
- 12 Waste disposal and environmental protection
- 13 Dimensions
- 14 Ordering numbers, accessories
- 15 Specifications
- 16 Supplementary technical information
- English
- T40FH
- Deutsch
- 1 Sicherheitshinweise
- 2 Verwendete Kennzeichnungen
- 3 Anwendung
- 4 Aufbau und Wirkungsweise
- 5 Mechanischer Einbau
- 6 Elektrischer Anschluss
- 7 Aufnehmer‐Identifikation TEDS (Option 3, Code PNJ)
- 8 Shuntsignal
- 9 Funktionsprüfung
- 10 Belastbarkeit
- 11 Wartung
- 12 Entsorgung und Umweltschutz
- 13 Abmessungen
- 14 Bestellnummern, Zubehör
- 15 Technische Daten
- 16 Ergänzende technische Informationen
- Deutsch
Mechanical installation
T40FH A4429-1.0 HBM: public 33
Stator alignment (rotational speed measuring
system)
For measuring mode to operate perfectly, the speed sen
sor must be placed at a defined position to the rotor ring
gear. When the radial and axial alignment of the stator is
accurate for torque measurement, the alignment of the
rotational speed measuring system is also correct.
Axial alignment:
At the factory, the sensor head of the rotational speed
measuring system must be adjusted so that when the
axial alignment of the stator is exact (antenna ring posi
tioned precisely above the rotor winding carrier), the sen
sor is in the correct position to the rotor ring gear.