User's Manual
Table Of Contents
- T40FH
- T40FH
- English
- 1 Safety instructions
- 2 Markings used
- 3 Application
- 4 Structure and mode of operation
- 5 Mechanical installation
- 6 Electrical connection
- 7 TEDS transducer identification (Option 3, Code PNJ)
- 8 Shunt signal
- 9 Functionality testing
- 10 Load-carrying capacity
- 11 Maintenance
- 12 Waste disposal and environmental protection
- 13 Dimensions
- 14 Ordering numbers, accessories
- 15 Specifications
- 16 Supplementary technical information
- English
- T40FH
- Deutsch
- 1 Sicherheitshinweise
- 2 Verwendete Kennzeichnungen
- 3 Anwendung
- 4 Aufbau und Wirkungsweise
- 5 Mechanischer Einbau
- 6 Elektrischer Anschluss
- 7 Aufnehmer‐Identifikation TEDS (Option 3, Code PNJ)
- 8 Shuntsignal
- 9 Funktionsprüfung
- 10 Belastbarkeit
- 11 Wartung
- 12 Entsorgung und Umweltschutz
- 13 Abmessungen
- 14 Bestellnummern, Zubehör
- 15 Technische Daten
- 16 Ergänzende technische Informationen
- Deutsch
Mechanical installation
32 A4429-1.0 HBM: public T40FH
5.8 Rotational speed measuring system
The rotor is delivered as standard with a ring gear for the
rotational speed measuring system. The option is avail
able to fit the stator with a sensor head to scan the
mechanical increments (ring gear).
Sensor head for
measuring rotational
speed (optional)
Ring gear
Fig. 5.10 Torque transducer with rotational speed
measurement (optional)
Important
The rotational speed measuring system uses a magnetic
measuring principle. In applications where high magnetic
field strengths can occur, e.g. eddy-current brakes, imple
ment suitable measures to ensure that the maximum per
missible magnetic field strength cannot be exceeded (see
Chapter 15 "Specifications", Page 64).