User Manual
Table Of Contents
- Introduction
- Service Centre
- Intended use
- Package content
- Technical data
- Symbols explication
- Safety notes
- Installation
- Binding
- Interfaces
- Programming the receiver settings
- Programming a fixed-wing model
- Gyro assignment
- Programming the regulation
- Initialization of the gyro
- Adjust servolimit for channels
- Programming a helicopter model
- Basic settings
- Axis assignment
- Swashplate setting without Expertmode
- Swashplate setting with Expertmode
- Tail rotor setting without Expertmode
- Tail rotor setting with Expertmode
- Firmware update
- Declaration of conformity
- Notes on environmental protection
- Care and maintenance
- Warranty
33 / 36
S1034_Falcon_12_plus
When the file has loaded, click on start...
... connect the receiver and switch it on.
The progress bar shows that the transfer is running normally. The
receiver LED lights up red during this process and flashes once the
transfer is completed.
Please refer to the detailed update instructions for the item in ques-
tion in the Download area at www.graupner.de.
EN - SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Graupner declares that the receiver equipment type S1034
Falcon 12 plus is in compliance with the Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.graupner.de
Manufacturer:
GRAUPNER Co., Ltd
POST CODE : 14557
8th F, 202 Dong, Chunui Techno-Park II, 18, 198 street, Bucheon-ro,
Wonmi-Gu, Bucheon-Shi, Gyeonggi-do, SOUTH KOREA.
Destribution Europe:
Graupner/SJ GmbH
Henriettenstr. 96
73230 Kirchheim/Teck