User Manual
Table Of Contents
- Introduction
- Service Centre
- Intended use
- Package content
- Technical data
- Symbols explication
- Safety notes
- Installation
- Binding
- Interfaces
- Programming the receiver settings
- Programming a fixed-wing model
- Gyro assignment
- Programming the regulation
- Initialization of the gyro
- Adjust servolimit for channels
- Programming a helicopter model
- Basic settings
- Axis assignment
- Swashplate setting without Expertmode
- Swashplate setting with Expertmode
- Tail rotor setting without Expertmode
- Tail rotor setting with Expertmode
- Firmware update
- Declaration of conformity
- Notes on environmental protection
- Care and maintenance
- Warranty
3 / 36
S1034_Falcon_12_plus
Swashplate setting with Expertmode .................................... 27
Tail rotor setting without Expertmode .................................. 29
Tail rotor setting with Expertmode ....................................... 30
Firmware update .................................................................... 32
Declaration of conformity ...................................................... 33
Notes on environmental protection ...................................... 34
Care and maintenance ........................................................... 34
Warranty ................................................................................ 34