User Manual

13 / 36
S1034_Falcon_12_plus
A ‘Rudder / elevator’ mixer can be set up at the transmitter instead
of ‘Free mixer 3’ at the receiver; the mixer should be set up asym-
metrically, e.g. +30%, -30%. This option frees up one mixer at the
receiver.
Delta with aileron differential (1 aileron)
In this example aileron differential is set to 40%. Alternatively you
may prefer to carry out the programming using the transmitter
menu. A ‘Aileron -> elevator’ mixer can be set up at the transmitter
instead of ‘Free mixer 3’ at the receiver; the mixer should be set up
asymmetrically, e.g. +30%, -30%. This option frees up one mixer at
the receiver.
Two elevator servos
(channel 6 for the second elevator servo)
Only for transmitters without a butterfly (crow) mixer
If a butterfly (crow) mixer is required, you will not be able to use one
of the two functions ‘differential’ or ‘landing flap’ adjustment, as 2
mixers are needed for this.
Programming examples
Programming examples
FREE MIXER < >
>MIXER: 1
FROM CHANNEL: 2
>TO CHANNEL: 3
>TRIM: +0%
TRV - : +100%
TRV + : +60%
FREE MIXER < >
>MIXER: 2
FROM CHANNEL: 3
>TO CHANNEL: 2
>TRIM: +0%
TRV - : -100%
TRV + : -100%
FREE MIXER < >
>MIXER: 3
FROM CHANNEL: 2
>TO CHANNEL: 2
>TRIM: +0%
TRV - : +60%
TRV + : +100%
FREE MIXER < >
>MIXER: 1
FROM CHANNEL: 3
>TO CHANNEL: 6
>TRIM: +0%
TRV - : +100%
TRV + : +100%
FREE MIXER < >
>MIXER: 1
FROM CHANNEL: 1
>TO CHANNEL: 2
>TRIM: +0%
TRV - : +100%
TRV + : +100%
FREE MIXER < >
>MIXER: 2
FROM CHANNEL: 1
>TO CHANNEL: 5
>TRIM: +0%
TRV - : -100%
TRV + : -100%
FREE MIXER < >
>MIXER: 1
FROM CHANNEL: 1
>TO CHANNEL: 2
>TRIM: +0%
TRV - : +100%
TRV + : +100%
FREE MIXER < >
>MIXER: 2
FROM CHANNEL: 1
>TO CHANNEL: 3
>TRIM: +0%
TRV - : -100%
TRV + : -100%