Owners manual

Outdoor Fire Pit

Owner’s Manual

Revolver Fire Pit, Item #60532

PARTS LIST AND ASSEMBLY

Assembly

For

A Fire Bowl (1)

B Base (1)

C Log Grate (1)

D Cooking Grate (1)

E Top (1)

F Screw (7)

G Nut (7)

H Vent (1)

Assembly

For easiest assembly:

**Locate all parts first, then assemble on a flat, level surface. Make sure the assembly area is large

enough to lay out all parts required for assembly.

**Follow all steps listed to make sure assembly is complete. Refer to diagram and parts list on Page 3.

STEP 1: Attach the Vent (H) to the Fire Bowl (A) using one Screw (f) and one Bolt (G).

STEP 2: Attach the Log Grate (C) to the Fire Bowl (A) using 3 – Screws (F) and 3 – Nuts (G).

STEP 3: Attach the Fire Bowl (A) to the Base (B) using 3 – Screws (F) and 3 – Nuts (G).

STEP 4: Place the Cooking Grate (D) into the Fire Bowl (A). Then place the Top (E) over the Cooking Grate (D). NOTE: TOP

SHOULD ONLY BE USED WHEN THE FIREPIT HAS COOLED COMPLETELY. DO NOT PLACE TOP ON A HOT FIREPIT.