Instructions / Assembly

11
ASSEMBLY INSTRUCTIONS
Step 7
Attach the upper radiation screen (B) to the lower
radiation screen (C) using 3 M8x75 studs (II) and 3 M8
nuts (JJ).
Step 5
Remove the 3 preassembled M5 nuts from the upper
support (K). Slide the 3 upper supports into the slots at
the top of the burner (E). Once fully inserted, secure the
upper supporters into the burner by reattaching the M5
nuts that were removed at the beginning of this step.
Step 6
Remove the 3 preassembled screws from the top of
the burner (E). Attach the glass tube ring (D) to the top
of the burner (E) using the 3 screws removed at the
beginning of this step. Tighten securely with a Phillips
screwdriver.
K
E
E
D
B
C
JJ
II
Note: The hooks on the upper supports (K) should be
facing up, as pictured.