Instructions / Assembly

Step 2

Attach the anchoring arms (GG) onto the base of the

tank housing (F) using 6 M6 x 12 screws (BB) and 6 M6

nuts (CC).

ASSEMBLY INSTRUCTIONS

Step 3

Flip over the tank housing (F) so that it is right-side

up. Attach the belt (L) to the tank housing (F) using 1

M5X12 screw (DD) and 1 M5 nut (EE).

Step 4

Align the holes at the bottom of the burner (E) to the

top of the tank housing (F). Make sure to position it so

that the control panel on the burner (E) is aligned with

the door on the tank housing (F). Insert 4 M5X12 screws

(DD) through the aligned screw holes and secure with 4

M5 nuts (EE). Tighten with the included wrench (HH).