Instructions / Assembly

ASSEMBLY INSTRUCTIONS

Step 13

Open the door from the tank housing (F) and place a

propane gas tank (not included) into the preassembled

tank support. Tighten the belt (L) to ensure the

propane gas tank is fully secure. Note: Once the tank is

connected to the regulator in the next step, make sure

to close the door.

Step 11

Attach the 3 mesh guards (H) onto the hooks at the top

of the upper supports (K).

Step 12

Optional: Use the anchor (FF) to fasten the product to

the ground. At the base of the unit, insert the anchors

(FF) through the anchoring arms (GG) and into the

ground.