Installation guide

Installation Instructions

OUTSIDE TOP EXHAUST (Vertical Duct)

INSTALLATION OVERVIEW

A1. Attach Mounting Plate to _'fll

A2. Prepare Top Cabinet

A3. Check Damper Operation

A4. Mount Microwave Oven

A5. Ac!j ust Exhaust Adaptor

A6. (_onnect Ductwork

I-_ ATTACH THE MOUNTING

PLATE TO THE WALL

Remove the template fl'om the rear wall. The

motmting plate must be secured to the wall using at

least 3 toggle bolts and one wood screw. The wood

screw must engage a wall stud.

[]Remove the toggle wings fl'om the bolts.

[]Insert the bolts into the mounting plate

through the holes designated to go into drywall

and reattach the toggle wings to '_A" onto each bolt.

To use toggle bolts:

Mounting

Plate

I_1,1

Spacingfor Toggles

MoreThanWall

-,,,-I_,-,.-!._Thickness

ToggleWings

B01tEnd

_ Place the motmting plate against the wall and

insert the toggle wings into the holes in the wall

to motmt the plate.

NOTE: Betm'e tightening the toggle bolts and the

wood screw(s), check again to be sure that the

mounting plate is level and centered leti to right.

CAUTION: Be careflfl to avoid pinching fingers

between the back of the motmting plate and the wall.

_ Tighten all bolts. Pull the plate away fl'om the

wall to hel I) tighten the bolts. Be careflfl not to

ove>torque the toggle bolts.