Operating Instructions HOB Contents GB English, 2 Installation, 2-3 Positioning Connecting the hob Disposal Description of the appliance, 4-5 Control panel Cooking zone description Start-up and use, 6 Turning on the hob Turning off the hob The safety devices, 7 E 6005 E 6005 X E 7134 Pan recognition What cookware to use Acoustic signal Safety cut out Overheating protection device Precautions and tips, 8 Practical advice on using the appliance General safety Care and maintenance, 9 Switching the app
! Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance. ! Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance. Positioning Built-in appliance Use the appropriate cabinet to ensure that the appliance functions properly.
Connecting the hob The electrical safety of this appliance can only be guaranteed if the latter is correctly and efficiently earthed, in compliance with regulations on electrical safety. Always ensure that this vital safety measure has been taken. If you have any doubts, call in a qualified technician to check the electrical system thoroughly. The manufacturer denies all responsibility for damage resulting from a system which has not been earthed correctly.
Description of the appliance GB Control panel Indicator Light PROGRAMMED COOKING ZONE * Indicator light for the EXTENDABLE ZONES * POWER and RESIDUAL HEAT Indicators COOKING ZONE Selector keys Indicator light for the EXTENDABLE ZONES * * Only available on certain models.
HOBS E7134 Power (in W) Cooking zones Back left Front left Back right Front right Left Front center Back center Overall power Diameter (in mm) R 1400 RD 1000/2200 R 600 RO 1000/1800 160 210 100 E6005 Diameter Diameter (in mm) (in mm) H 2300 H 1200 H 1400 H 1800 210 140 160 180 210 6000 6700 H = halogen, R = simple radiant, RO = oval radiant, RD = dual radiant, Cooking zone description Induction is the fastest cooking method available.
Start-up and use GB When you connect the hob to the power supply, a beep will sound after a few seconds: you can now turn the hob on. Turning on the hob Press key for 3 seconds to turn the hob on. Cooking zone control Each cooking zone is operated by a control key and by a power adjustment set (+ and -). 8. 8. 8. 8. Turning on a cooking zone To turn a cooking zone on, press the corresponding control key and set the desired heating power (from 0 to 9) using the + and - keys.
The safety devices Acoustic signal Pan recognition Each induction cooking zone is fitted with a pan recognition device. The cooking zone only provides heat in the presence of a pan which is suitable for the cooking zone. A blinking pan recognition indicator could signal: that the pan is made of unsuitable material, which is not ferromagnetic, that the diameter of the pan is too small, that the pan has been removed. Always match the diameter of the pan with that of the cooking zones.
Precautions and tips GB This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. Practical advice on using the appliance To obtain the best results from your hob: Use flat-bottomed pans to ensure that they adhere to the cooking zone perfectly. Always use pans with a diameter that is large enough to cover the hotplate fully, in order to use all the available heat.
Care and maintenance Switching the appliance off Stainless steel frame * Disconnect your appliance from the electricity supply before carrying out any work on it. Stainless steel can be marked by hard water which has been left on the surface for a long time, or by cleaning products containing phosphorus. After cleaning, it is advisable to rinse the surface well and dry it thoroughly. If water is spilt on the surface, dry it quickly and thoroughly.
After Sales Service GB "No company is better positioned to offer an after sales service on a Hotpoint appliance than us - the manufacturer" As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive parts and labour guarantee for the first 12 months. In addition to this you also have the advantage of free replacement parts for the first 5 years when fitted by a Hotpoint engineer.
Guarantee GB "Satisfaction guaranteed or your money back" We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you have purchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service or visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrange for an engineer to call. If the technical problem is not resolved under this guarantee, we will replace your machine or, if you prefer, give you your money back.
09/2007 - 195043664.02 XEROX BUSINESS SERVICES Key Contacts GB After Sales Service Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence in both the appliances and services we offer. Repair Service and Information Desk UK: 08709 066 066 (Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays) www.theservicecentre.co.
