User Manual
Table Of Contents
Some of Ampero One’s preset patches have been set up to use the
built in expression pedal. These can be used without any further
setup. For more on expression pedal settings. See page 11.
To turn the built in expression pedal on, press the pedal all the way
forward so it clicks. The EXP 1 icon in Main Display Screen will come
on to indicate the pedal is on:
To turn the pedal off, press the pedal all the way forward again so it
clicks. The EXP 1 icon in Main Display Screen will come on to
indicate the pedal is off:
Customizing Your Ampero One
This section will show you how to customize your Ampero One’s settings, edit patches, setup the expression pedal, and change other features to
your taste.
EDIT
Edit your patches to get the tone you want.
Remember that turning the modules on/off and adjusting parameters will change the current patch. If you switch patches or turn Ampero One off
before saving your changes, the changes will be lost.
Make sure to press SAVE on the upper right of the display screen to save your settings.
Patch Edit Menu
Select a patch from the main menu by using the forward/backward arrows on the screen. Tap left footswitch to move back through the patches, tap
middle footswitch to move forward through the patches. Hold either footswitch for fast switching.
EXP Pedal
You can either use the built in expression pedal (EXP 1) or connect
your own (EXP 2) to control various Ampero One paramaters.
Reminder:
1. When the built in expression pedal is off, it continues to work as a
volume pedal for Ampero One. For more on volume pedal settings,
see page 12.
2. You can use CTRL footswitch to switch built in expression pedal
on/off. See page 10.
3. If your external expression pedal has an off switch and is turned
off, it will not function.
4. If you use an external expression pedal, the display won’t show
any message when it is connected. As soon as you connect and turn
on an external expression pedal, it will function to control the effects
parameter determined by the current patch. If the current patch does
not have any effects controllable by expression pedal, the pedal will
not function. See page 11.
The menu is made of ten icon squares representing Ampero One’s nine effects modules and a volume/tempo module.
The default signal chain is ordered like this:
FX1 (select one)-FX2 (select one)-AMP (amp simulator)-NR (noise reducer)-CAB (cabinet simulator)-EQ (equalization)-FX3 (select
one)-DLY (delay)-RVB (reverb)
FX1, FX2, and FX3 will hold effects of your choosing.
DES I GN IN S PIRAT ION
Ampero One Tools
Exitediting Entersavemenu
Currentpatchnumber
Indicates a module that is turned off
The highlighted frame indicates that
the AMP module is selected
Indicatedsamodulethatisturnedon
Presstoeditpatchtempoandpatchvolume
Turntheselectedmoduleon/off
Edittheselected module
Indicatestheeffectusedintheselectedmodule
7