User Manual

When Ampero One is turned on it will display the main screen, as shown below:

1. Current patch number
2. Current patch name
3. Patch selection back button
4. Patch selection forward button
5. Quick Access parameters (Quick Access Para) controlled by touch screen (or main knob). Press and hold the parameter name to change the
parameter you’re controlling. See page 10.
6. CTRL/EXP gives you access to control settings. See page 9.
7. DRUM opens the drum machine settings. See page 5.
8. GLOBAL opens the global settings page. See page 14.
9. EDIT allows you to edit the current patch. See page 7.
10. Indicates the status of the built-in expression pedal (lit up when on, gray when off)
11. Hold to lock the device; touch screen and Main Knob won’t work when locked
12. Indicates the current patch tempo
Main Display Screen and Device Lock Screen
Using the Screen
Touch operation
Changing patches and editing settings can all be done with the
touchscreen.
Main Knob
Turning the main knob lets you select the object you want to control.
That object will light up when selected, then press the knob to
confirm the selection.
• If the object selected is a button, it will respond as if you’d touched
the button on the touchscreen.
• If the object selected is a parameter, you can use the main knob to
adjust the parameter value. Pressing the main knob again will take
you back to selection mode.
Reminder: The details of Ampero One’s use and programming may
slightly vary under certain operational circumstances. Please read
this manual carefully to get all the necessary information.
DES I GN IN S PIRAT ION
4
1
2
3 4
5 5 5
6 7 8 9
10 11
12
When Ampero One is locked, it will display the device lock screen, as shown
below:
Hold the unlock button to unlock the device. You can also unlock the device by
entering other menus by footswitch (Tuner, Looper, etc.).