User Manual

Panel
6. EXP2/CTRL : 1/4” TRS input, for connecting an external expression
pedal. Perfect for Hotone Soul Press or Bass Press.
7. INPUT: 1/4” mono input connection for guitar or other instrument.
8. AUX IN: 1/8” stereo input for connecting external devices (phone,
MP3 player) for practice and jamming.
9. PHONES: 1/8” stereo output for connecting headphones.
Getting Started
1. Connecting your Device
Plug your guitar in to the Ampero One input jack and run a cable from OUTPUT L to your amp. Please remember:
(1) Keep your amp volume down.
(2) Connect your cable to the amp’s FX Loop Return if it has one. .See page 17
2. Turn the Ampero One volume knob all the way down, then connect the power supply to turn Ampero One ON.
3. Calibrate the strings. Press left and middle footswitches together until the TUNER comes on the display screen. .See page 5
Pluck each string and tune until the pitch reaches the middle of the screen and turns green, as below:
When finished, tap any footswitch again to exit the tuner.
4. Select a patch:
Tap left footswitch to move back through the patches, tap middle footswitch to move forward through the patches. Hold either footswitch for fast
switching.
10. OUTPUT: Unbalanced 1/4” TS stereo output connections to
amplifiers or other equipment. For mono output, use only the left
unbalanced output.
11. USB: USB Type-B connects to your computer for use with Ampero
One software.
12. Power Supply Connection: Power supply input (9V DC center
negative).
3
DES I GN IN S PIRAT ION
EXP 2/CTRL
(FS 4/5)
INPUT
USB
R
L(MONO)
OUTPUT
AUX IN
PHONES
6 7
8 9
10 10
11
12