User Manual

Definitions

Module

Ampero One supports the simultaneous use of up to 9 effects. Each is called an “effects module”, or simply “module”. There are several effects

available in each module.

Parameter

Variables that determine the application of an effect are called “parameters”. If we imagine each module as a separate effect pedal, then each

parameter would be a knob on that pedal.

Patch

The ON/OFF status of each module and the parameter settings are stored in units called “patches”. These are your “tones”. Use patches to recall,

edit, and save your favorite tones.

Bank

A set of 3 patches is called a “bank”. Ampero One has a total of 66 banks, including 33 editable player (user) banks and 33 factory banks (F01-F33),

which can be adjusted by not saved.

Panel

1. Display Screen: Displays Ampero One’s current status. Use the

touchscreen to select effects, edit patches, and make tone

adjustments.

2. Volume Knob: Adjusts the overall volume of all output connections.

3. MENU/VALUE Knob (Main Knob): Turning or pressing this knob

allows you to change menus and adjust parameters.

4. Footswitch: Use to change patches, turn on/off effects, set tap

tempo, etc.

5. Expression Pedal: Use to control the parameter of one or several

effects, including output volume.

DES I GN IN S PIRAT ION

CTRL

loopertuner

●●●

1/2 speed

reverse

VOLUME

MENU / VALUE

Amp Modeler / Effects Processor