User Manual

Suggested Setups
Here are some common setups to get the most out of Ampero One.
Using with your instrument and amp
Plug your instrument into the Ampero One instrument INPUT jack, and run a cable (or two) from the OUTPUT(s) to your amplifier(s). If you have one
amp, run the cable from the left output.
For best results, turn off the AMP and CAB modules on Ampero One.
Connect the outputs to your amp’s FX Loop Return input or post amp input. If you have one amp, run the cable from the left output.
For best results, turn off the CAB module on Ampero One.
Connecting to your amp's RETURN or Power Amp (Loudster) INPUT
DES I GN I NSP I RAT I O N
17
CTRL
H
o
l
d
f
o
r
T
A
P
loopertuner
●●●
/
/
1/2 speed
reverse
VOLUME
MENU / VALUE
Amp Modeler / Effects Processor
CTRL
H
o
l
d
f
o
r
T
A
P
loopertuner
●●●
/
/
1/2 speed
reverse
VOLUME
MENU / VALUE
Amp Modeler / Effects Processor