User Manual

Customizing Your Ampero One
I/O
Set the global input/output levels and modes in the I/O menu.
Adjust the optimal Input Level for the instrument or other input you’re
using. Adjustable range is from -20dB to +20dB. Default is set to 0dB.
No Cab Mode is for connecting to instrument amplifiers without
changing saved presets. Turning this on will bypass the CAB module
for Ampero’s L/R output channels ignoring preset settings. You can
apply different settings on L/R output channels for different
scenarios. Default is set to Off.
USB Audio
Use this menu to set up USB audio settings when using Ampero One
as a USB audio interface.
The REC MODE options allow you to select USB recording input
sources on left (L) and right (R) input channels. The selections for
these are same: dry signal (Dry) and wet signal (Effect).
When recording, adjust the optimal REC LEVEL and MONITOR LEVEL
according to the instrument or other input you’re using.
REC LEVEL: Range: -20dB to +20dB, default: 0dB
MONITOR LEVEL: Range: -20dB to +6dB, default: 0dB
Footswitch
Use the footswitch menu to set up the way Ampero One’s three
footswitches work independently and together with each other. The
menu includes FSX TAP, FSX HOLD (X from 1-3 refers to footswtiches
1, 2, and CTRL), FS1+2, FS2+3.
These can be set up as follows:
Patch X (X=1-3): Assign one of three patches to come up in your
current bank
Patch+/Patch-: Change patches by toggling up or down
Bank+/Bank-: Change banks by toggling up or down
CTRL: CTRL function depending on patch settings
Tap Tempo: Enable/disable tap tempo function
Drum Menu: Enter/exit drum menu
Tuner: Enter/exit tuner
Looper Menu: Enter/exit looper menu
FX1, FX2, AMP, NR, CAB, EQ, FX3, DLY, RVB On/Off: Switch modules
on/off
None: No function
Function, Color, and Function Assignable Range are listed below:
Reminder:
1. If you assign Patch+/- or Bank+/- to FSX HOLD, holding down the
footswitch will allow to you quickly scroll through the patches or
banks.
2. When you assign CTRL function to FSX TAP, the FSX HOLD of the
current footswitch will be fixed to Tap Tempo.
DES I GN IN S PIRAT ION
Function
Patch X
Patch+/Patch-
Bank+/Bank-
CTRL
Tap Tempo
Drum
Tuner
Looper
FX1 On/Off
FX2 On/Off
AMP On/Off
NR On/Off
CAB On/Off
EQ On/Off
FX3 On/Off
DLY On/Off
RVB On/Off
None
Color
Cyan
Cyan
Red
Red/Blue
Flashing Blue
Blue
White
Purple
-
Red
Cyan
Blue
White
Yellow
Cyan
Green
Purple
White
Assignable Range
All
All
All
Only FSX TAP
Only FSX HOLD
All
All
All
All
All
All
All
All
All
All
All
All
All
15
For footswitch functions:
FSX TAP: Function when you tap footswitch X
FSX HOLD: Function when you tap and hold footswitch X
FS1+2: Function when you tap footswitches 1 and 2 together
FS2+3: Function when you tap footswitches 2 and 3 together