User Manual

- Calibrate
The Calibrate option helps you calibrate your expression pedal. It is
important to calibrate the expression pedal if you find the sweep
has very little or too much change in the effect you’ve set.
Customizing Your Ampero One
•EXP 2 Settings
There are three options within this menu: Target, Expression Range,
and Calibrate. These settings are the same as the built-in expression
pedal settings. When calibrating external expression pedal, there’s
no “press strongly” operation.
DES I GN IN S PIRAT ION
Press Calibrate on the selection panel, and these instructions will appear:
Bring the pedal all the way up (back) and press NEXT.
Then press the pedal all the way down and press NEXT.
Then, strongly press the pedal toe down and press NEXT.
The calibration will be set, and this message will appear:
13
Press BACK to return to the previous menu. If the calibration fails,
this message will appear.
Press REPEAT to begin the calibration process again.
Or press BACK to exit the calibration process and return to the
previous menu.