User Manual

Press a square to select that module, then use the on/off button to
turn that module on or off. Press EDIT to enter the module edit menu.
You can also use the main knob: turn it to select a module, then press
and click it to turn the module on or off. Press and hold the knob to
enter the module edit menu.
Current FX shows the effect on the current module.
When you select TEMPO/VOLUME square，you can adjust the patch
tempo (40-250BPM) and the patch volume (0-99) with the touch
screen
To move a square to a different position, press a square twice (or turn
main knob to select a square and press it twice) to pick it up:
Press another square (or turn main knob to select a square and press)
to insert into the selected position:
Reminder: The VOLUME/TEMPO square is fixed at the end.
Customizing Your Ampero One
Module Edit Menu
Use the module control panel to edit or turn the current module
on/off.
Select an effect from the effects list.
The parameter panel shows the adjustable parameters of the effect
selected.
If the selected effect has more than three adjustable parameters,
there will be an arrow at the right of the parameter panel. Press the
arrow to see the other parameters.
For more information on modules, effects, and parameters. See page 21.
Reminder: In some extreme cases the signal processor may become
overloaded and display a “System Overload” caution.
DES I GN IN S PIRAT ION
Parameter2 Parameter3Parameter1
Taptoseeotherparameters
(appearsonlywhenmorethan
3parametersareavailable)
Taptoseeotherparameters
(appearsonlywhenmorethan
3parametersareavailable)
Slidetocheckavailableeffects
Taptoselect
Effectslist
Nextmodule
Current patch number
Go back to patch edit menu
Previousmodule
Taptoturnthemoduleon/off
Entersavescreen
8