User Manual
Table Of Contents
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
- 页 17
- 页 18
- 页 19
- 页 20
- 页 21
- 页 22
- 页 23
- 页 24
- 页 25
- 页 26
- 页 27
- 页 28
- 页 29
- 页 30
- 页 31
- 页 32
- 页 33
- 页 34
- 页 35
- 页 36
- 页 37
- 页 38
- 页 39
- 页 40
- 页 41
- 页 42
- 页 43
- 页 44
- 页 45
- 页 46
- 页 47
- 页 48
- 页 49
- 页 50
- 页 51
- 页 52
- 页 53
- 页 54
- 页 55
- 页 56
- 页 57
- 页 58
- 页 59
- 页 60
- 页 61
- 页 62
- 页 63
- 页 64
- 页 65
- 页 66
- 页 67
- 页 68
- 页 69
- 页 70
- 页 71
- 页 72
- 页 73
- 页 74
- 页 75
- 页 76
- 页 77
- 页 78
- 页 79
- 页 80
- 页 81
- 页 82
- 页 83
- 页 84
- 页 85
- 页 86
DESIG N IN SP IRATION
Suggested Setups
Connecting your mixer, interface, headphones, and other equipment
Connect Ampero’s balanced or unbalanced outputs to your mixer or audio interface’s corresponding inputs. Use the balanced outputs for optimal signal to noise ratio. If
you want to send a mono signal out, use Ampero’s left output channel. To prevent damage to your equipment, make sure the mixer or interface channel’s volume is
muted before making any connections.
If you experience unwanted noise when using the balanced outputs, it is likely produced by the ground loop. In this case, turn on Ampero’s GND LIFT switch.
Turn the Ampero output volume all the way down before connecting headphones to prevent harm to your ears. Ampero’s headphones out comes with hi-fi stereo sound.
For best results with headphones, turn on Ampero’s AMP and CAB modules.
36