User Manual
Table Of Contents
- 页 1
- 页 2
- 页 3
- 页 4
- 页 5
- 页 6
- 页 7
- 页 8
- 页 9
- 页 10
- 页 11
- 页 12
- 页 13
- 页 14
- 页 15
- 页 16
- 页 17
- 页 18
- 页 19
- 页 20
- 页 21
- 页 22
- 页 23
- 页 24
- 页 25
- 页 26
- 页 27
- 页 28
- 页 29
- 页 30
- 页 31
- 页 32
- 页 33
- 页 34
- 页 35
- 页 36
- 页 37
- 页 38
- 页 39
- 页 40
- 页 41
- 页 42
- 页 43
- 页 44
- 页 45
- 页 46
- 页 47
- 页 48
- 页 49
- 页 50
- 页 51
- 页 52
- 页 53
- 页 54
- 页 55
- 页 56
- 页 57
- 页 58
- 页 59
- 页 60
- 页 61
- 页 62
- 页 63
- 页 64
- 页 65
- 页 66
- 页 67
- 页 68
- 页 69
- 页 70
- 页 71
- 页 72
- 页 73
- 页 74
- 页 75
- 页 76
- 页 77
- 页 78
- 页 79
- 页 80
- 页 81
- 页 82
- 页 83
- 页 84
- 页 85
- 页 86
DESIG N IN SP IRATION
Customizing Your Ampero
DESIG N IN SP IRATION
I/O
Set the global input/output levels and modes in the I/O menu.
Adjust the optimal Input Level according to the instrument or other input you’re using. Adjustable range is from -20dB to +6dB, default is set to 0dB.
Out Mode lets you set up the unbalanced 1/4” out (UNBAL) and balanced 1/4” out (BAL) mode. The selections for these are the same: instrument output (Inst) and line
output (Line). Use the instrument line out for connecting to amplifiers or other effects equipment. Use the line output for connecting to mixers or audio interfaces.
29
No Cab Mode is for connecting to instrument amplifiers without changing saved presets. Turn this on will bypass CAB module for Ampero’s all outputs ignoring preset
settings. Default is set to off.
USB Audio
This menu is for setting the recording mode when using Ampero as a USB audio interface.
The Rec Mode options allow you to select USB recording input sources on left (L) and right (R) input channels. The selections for these are same: dry signal (Dry) and wet
signal (Effect).