User Manual

DESIG N IN SP IRATION
Module Edit Menu
Use the module control panel to edit or turn the current module on/off.
Select an effect from the effects list.
The parameter panel shows the adjustable parameters of the effect selected.
If the selected effect has more than three adjustable parameters, there will be an arrow at the right of the parameter panel. Press the arrow to see
the other parameters.
Use the three quick adjust knobs to adjust the parameters directly above the knobs. If there are no parameters corresponding to a certain knob,
turning that knob will have no effect.
For more information on modules, effects, and parameters. See page 40.
Reminder: In some extreme cases the signal processor may become overloaded and display a “System Overload” caution.
Customizing Your Ampero
Parameter2 Parameter3Parameter1
Taptoseeotherparameters
(appearsonlywhenmorethan
3parametersareavailable)
Taptoseeotherparameters
(appearsonlywhenmorethan
3parametersareavailable)
Slidetocheckavailableeffects
Taptoselect
Effectslist
Nextmodule
Current patch number
Go back to patch edit menu
Previousmodule
Taptoturnthemoduleon/off
Entersavescreen
16