User Manual

LOOPER
In default mode, pressing footswitch 3 and the CTRL footswitch together will open the looper menu.
The progress bar at the top will be shown in red during recording and
overdubbing. It will be shown in green in play mode.
Footswitch 1 controls start (yellow LED) and stop (yellow LED closed)
for half speed playback. Footswitch 2 controls the start (white LED)
and stop (white LED closed) for reverse playback. These footswitch
controls correspond with the 1/2 SPD and REV buttons on the
touchscreen.
Quick access knob 1 adjusts the loop recording level from 0-99.
Reminder:
1. When the loop recording reaches it’s time limit, the looper will automatically stop the recording and begin playback.
2. When the looper is in Post mode, changing patches will not change already recorded loop phrases.
3. Half-speed and Reverse functions will affect all recorded loop phrases.
4. If the looper is switched to a different position while it’s running, the loop will automatically stop and be erased.
Operation
On with no data
Stop
Tap footswitch 3 when there’s no data
Tap footswitch 3 while recording, overdubbing, or paused
Tap footswitch 4 while loop is playing
Tap and hold CTRL footswitch
Each time a recorded loop plays from the beginning
Function/Status
Stop
Stop
Record
Play
Stop
Clear
Play
LED Color (FS 3)
None
Flashing green
Steady red
Steady green
Flashing green
Quickly flashing green
Single flash
LED Color (CTRL)
None
Flashing green
None
Steady Green
Flashing green
Quickly flashing green
Single flash
Quick access knob 2 selects between setting the loop before (Pre) or
after (Post) your effects chain.
• In Pre mode, the looper will record mono audio without any effects,
up to 100 seconds.
• In Post mode, the looper will record stereo audio with effects, up
to 50 seconds.
Quick access knob 3 adjusts the loop playback volume from 0-99.
Exit the looper by pressing BACK on the upper left of the screen.
DES I GN IN S PIRAT ION
Ampero Tools
Exit looper
Currentlooperstatus
1/2speed on/off switch
Reverseon/offswitch
Record/playtime
Clearallrecordeddata
Record/playprogressbar
Previouspatch
Nextpatch
Switcheslooperposition
(pre/posteffects)
ControlslooperplaybacklevelControlslooperrecording level
Looper operation and status modes:
6