User Manual

- Volume Range

When the built in expression pedal is off, it continues to work as a

volume pedal for Ampero. Under the Volume Range option, you can

set the volume pedal range and sweep curve.

Same as Expression Range section, MIN and MAX represent the

lowest/highest volume range value. The MIN and MAX range is 0-

100, and the MIN value can be greater than the MAX value.

There are also three CURVE types like expression settings: Line, Exp

and Log.

- Calibrate

The Calibrate option helps you calibrate your expression pedal. It is

important to calibrate the expression pedal if you find the sweep

has very little or too much change in the effect you’ve set.

Customizing Your Ampero

•EXP 2 Settings

There are three options within this menu: Target, Expression Range,

and Calibrate. These settings are the same as the built-in expression

pedal settings. You don’t need to “Press strongly” while calibrating

external expression pedal.

DES I GN IN S PIRAT ION

Press Calibrate on the selection panel, and these instructions will appear:

Bring the pedal all the way up (back) and press NEXT.

Then press the pedal all the way down and press NEXT.

Press BACK to return to the previous menu. If the

calibration fails, this message will appear. Press

REPEAT to begin the calibration process again. Or press

BACK to exit the calibration process and return to the

previous menu.

Then, strongly press the pedal toe down and press NEXT.

The calibration will be set, and this message will appear: