User Manual

EXP Settings
From this menu, you can control the settings of or calibrate your built-in or external expression pedal. Here, EXP 1 refers to the built-in pedal, and
EXP 2 refers to your external expression pedal.
•EXP 1 Settings
There are four options within this menu: Target, Expression Range,
Volume Range, and Calibrate.
- Target
Under the Target option, you can set the pedal’s control target. You
can set up a maximum of four effects parameters for the built-in
expression pedal to control.
In the selection panel, MODULE X (X standing for 1-4 controllable
targets) represents the effects module in play. EFFECT X displays the
actual effect name, and PARA X shows the effect’s controllable
parameter.
Use quick access knob 1 to select the module placement. Use quick
access knob 3 to select the effects parameter. Touch the right or left
arrows to flip through the panel.
You can also turn the expression pedal off by turning selecting OFF in
the settings panel.
Customizing Your Ampero
-Expression Range
Under the Expression Range option, you can set the expression
pedal expression range and sweep curve. There are four adjustable
targets to change these settings.
In the selection panel, MIN X (X standing for 1-4 controllable targets)
represents the lowest range value. This is the value the pedal will
have when pushed all the wayup. MAX X represents the highest
range value, when the pedal is pushed all the way down. CURVE X
represents the curve line the pedal will follow when pushed fromall
the way up to all the way down.
The MIN and MAX range is 0-100, and the MIN value can be greater
than the MAX value.
There are three CURVE types:
Line follows a straight line.
Exp follows an exponential line from slow to fast.
Log follows a logarithmic line that changes as the pedal moves.
When MIN > MAX
MAX
MIN
When MIN < MAX
MAX
MIN
DES I GN IN S PIRAT ION
12