Owners manual
Table Of Contents
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?
67-69 GM F-BODY Rear 2407C
Leaf Spring Installation Instructions Page 3 of 4
Special Note:
We have seen some reports of insufficient drop from our lowering leaf springs. We have
concluded that this may be due to the type of front bracket you may have. The normal front leaf
spring saddle bracket positions the front eye of the leaf up and above the visual line of the rocker
seam.
The other bracket we have encountered drops the front eye below the visual line of the rocker
seam. This will cause an unwanted increase in ride height and our springs were not developed
for use with this type of bracket. Please purchase the standard leaf spring mount from your local
parts supplier to correct this issue.