Owners manual

10) Reinstall the plastic undertray using the stock hardware.
11) Re-check all hardware for tightness. You are finished with the front sway bar
installation
IMPORTANT: For maintenance, use the zerk fittings to grease the bushings at least once a
year (15,000 miles) or when excessive noise occurs. Use a silicone based grease only ! A
lithium-based grease can wash out with water and should not be used.
MOVE ON TO THE REAR SWAY BAR INSTALLATION
Please call us at (877) 4NO-ROLL if you have any questions regarding your Hotchkis
products.