Owners manual
Table Of Contents
- Sport Sway Bar Kit 22109
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?
4F Detach the Sway Bar Bushing Brackets
Just above the front subframe, the sway bar is attached by 2 bushing brackets, one on each side. Undo the 2 nuts
per bracket to detach the sway bar from the subframe.
5F Raise the Engine
You will need more room to get the sway bar out from between the subframe and the engine. To do this, unbolt the
2 motor mounts attached to the subframe and jack the engine up. Make sure to use a block of wood between the
jack and the engine to avoid damage.