Owners manual
Table Of Contents
- Anti-roll bar set
- 22101 – Chrysler Magnum, Charger, 300C, SRT-8
- Anti-roll bar set
- 22101 – Chrysler Magnum, Charger, 300C, SRT-8
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?
4) Pull back the plastic splash guard and remove the bolt that holds the brake line to the frame using a
10mm wrench or socket.
5) Next, you will need to drop the exhaust system for clearance. Unbolt the mid-brace removing the 4
bolts using a 13mm socket. Spray the rubber hangers in the picture with WD-40 and slide the rubber
hanger off the exhaust support. Unbolt the remaining rear hangers using a 13mm socket. Be careful,
for the exhaust will drop down once these bolts are out.