Owners manual
Table Of Contents
- Anti-roll bar set
- 22101 – Chrysler Magnum, Charger, 300C, SRT-8
- Anti-roll bar set
- 22101 – Chrysler Magnum, Charger, 300C, SRT-8
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?
6) Reinstall in the same manner as removal. Attach the endlinks to the sway bar. Do not tighten at this
time.
7) Install the subframe mounts back onto the vehicle. Fully tighten all hardware at this time (including the
endlink bolts!)
You are now finished with the front sway bar installation! Make sure that all hardware is fully tightened before
driving the vehicle. Let’s move on to the rear sway bar installation.
INSTALLATION OF HOTCHKIS REAR SWAY BAR
Installation Note: Some V6 models were not originally equipped with rear sway bars from the factory. If
your vehicle does not have a factory rear bar, you will need to purchase the following items from the
dealership prior to installation of the rear sway bar. (Factory part numbers are subject to change)
Frame mount Bolts 6500399 Qty 4
Endlink 4766866AA Qty 2
Endlink Bolts 6102222AA Qty 2
Endlink Bolts 6102239AA Qty 2
Endlink Nuts 6104717AA Qty 4