Owners manual
Table Of Contents
- Anti-roll bar set
- 22101 – Chrysler Magnum, Charger, 300C, SRT-8
- Anti-roll bar set
- 22101 – Chrysler Magnum, Charger, 300C, SRT-8
- Improperly installed or installed by someone other than a qualified, licensed auto mechanic experienced in the installation and removal of suspension products;
- Improperly serviced, misused, or modified, altered or subjected to abuse, negligence, accident or collision;
- Installed in any vehicle that has been modified;
- Installed on any vehicle that has carried loads in excess of automobile manufacturer suggested weight limits; or
- Installed on any vehicle that has been subject to abnormal or excessive use, including rallying, racing, or racing-type activities or off-road use.
- Did you register the product at 0TUwww.hotchkis.netU0T or via the mail-in warranty card within 30 days of purchase?
- Is the product appropriate to your application?
- Did you carefully and thoroughly read the instructions provided along with the product?
- Do you have the original invoice or sales receipt?
- Is the return date within 36 months from the purchase date?
- Are you the original purchaser?
- Was the product properly installed by a qualified, licensed auto mechanic?
- Has the product been installed on the original vehicle on which it was installed at all times?
- Is the product unmodified and clean?
- Is the reason for return a legitimate product defect?
3) Remove the subframe mounts by unbolting 2 bolts per mount using a 15mm socket. The Sway bar
should be hanging by it’s endlinks at this point. Retain all hardware and brackets for reinstallation.
4) Detach the endlinks from the sway bar using a 21mm wrench and a 10mm wrench.
5) Apply a healthy amount of the provided grease to the new Hotchkis polyurethane bushings. One pack
per bushing should be used. Your kit comes with 5 packs of grease (2 for front, 1 for rear, 2 for front
after 6-12 months). Your front bushings will need to be maintained with grease every 6-12 months
depending on your driving conditions. We include 2 extra packs for this purpose.
Once greased, install the new bushings onto your new Hotchkis sway bar.