Owners manual

1109 67-69 Camaro/Firebird
Hotchkis Performance LLC. 9
Possible Combinations:
No Spacer = 1/2” Lower than Stock Arm
1/8” Spacer = 1/4”” Lower than Stock Arm
1/4” Spacer = Same as Stock Arm (Default Setting)
1/4” + 1/8” Spacer = 1/4” Higher than Stock Arm
1/4” + 1/4”Spacer = 1/2” Higher than Stock Arm
15. Reinstall the Hotchkis A-Arm
Install the a-arm in the same manner as removal. Start with the inboard bolts to the
subframe. Fully tighten the inboard bolts at this time.
16. Indexing the Spring (Mock Up)
With the a-arm hanging down, grab the coil spring and place the up into the upper
pocket. It will need to be clocked at a certain angle to match up with the index. Use
some “white out” and mark the frame and the coil to give you a guide when you are
ready to install it for real.