Assembly Instructions & Parts List Dual Purpose Red Cart Model 100MC WARNING: Read and follow ALL instructions and warnings for the equipment that is used on this cart before operating that equipment. KDAR Company 1 Mulch Lane St. Louis , MO 63044 Tel: (314) 692-8555 Fax: (314) 692-8578 Web: www.hotmaxtorches.
Assembly Instructions Tools Required 10 mm Wrench 8 mm Wrench 9/16” Wrench Phillips Screwdriver Pliers Hammer (Optional) If you think you are missing any parts or have trouble assembling the cart, please call KDAR Company at (314) 6928555 M-F 8 AM to 4 PM CST for assistance.
Assembly Instructions Step 1 After removing all components out of the box, locate the welded base frame (Item 1), two pneumatic tires (Item 18) , steel axle (Item 17), and two cotter pins (Item 9). Note: The axle is often shipped inside the welded base frame. Slide the axle through the hole in the bottom of the welded frame (sometimes paint makes this whole smaller so you might need to use a hammer to get it in). Slide the wheels over the axle on either side (hubs in) of the base frame .
Assembly Instructions Step 3 Attach the Cup Holder Bracket (Item 4) to the welded base frame with two 6 x 34 mm bolts (Item 15) and two 6 mm nuts (Item 16). Step 4 Attach the short J-Hooks (Item 8) to the welded base frame and thread on 6 mm nuts (Item 16). Hand tighten these as the straps will be installed later.
Assembly Instructions Step 5 Attach the spring clips (Item 6) to the handle uprights with two 5 x 32 mm Philips head machine screws (Item 12) and 5 mm nuts (Item 13). Tighten these all the way with a Philips screw driver and a 8 mm wrench. Step 6 Thread a 6 mm nut onto the long J-Hooks (Item 7) until it reaches the end of the threads (flat part of the nut head towards the handle.
Assembly Instructions Step 7 - For Use with MM-1 Mobile Max Torch Kits Attach finger holder bracket (Item 5) with a 6 x 34 mm bolt (Item 15) and 6 mm nut (Item 16). Note: If you plan to use the cart with a propane tank, you may find that the finger holder bracket is in the way so you may not want to install this bracket. Step 8 Now it is time to install your MM-1 Mobile Max Torch Kit or your 20# or 40# propane tank.
Product Pictures 100MC Red Cart with Big Max Torch 100MC Red Cart with MM-1 Mobile Max Torch Kit KDAR Company 6
Warranty KDAR Company, and its affiliates, warrants that all carts covered under this warranty is free from defects in material and workmanship for one year from the date of purchase. This warranty is extended to the original purchaser who uses the product in a consumer application (personal, residential or household usage). All carts covered under this limited warranty which are used in commercial applications (i.e.
