Instruction manual

10
Cleaning Your Wine Cabinet
Turn off the power, unplug the appliance and remove all items including the shelves.
Wash the inside surfaces with a warm water and baking soda solution. The solution should be about 2 tablespoons
of baking soda to a litre (2 pints) of water.
Wash the shelves with a mild detergent solution.
Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts.
Wash the outside of the cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean
soft cloth.
Power Failure
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you
minimise the number of times the door is opened. If the power is going to be off for a longer period of time, you
need to take appropriate steps to protect the contents.
Vacation Time
Short vacations: Leave the Wine Cabinet operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance.
Clean and dry the interior thoroughly. To prevent odour and mould growth, leave the door open slightly: blocking it
open if necessary.
Moving Your Wine Cabinet
Remove all items.
Securely tape down all loose items (shelves) inside your appliance.
Turn the adjustable feet up to the base to avoid damage.
Tape the door shut.
Ensure the appliance stays secure in the upright position during transportation. Also protect the outside of
appliance with a blanket, or similar item.
Energy Saving Tips
The Wine Cooler should be located in the coolest area of the room, away from heat producing appliances, and out
of the direct sunlight.