Specification Sheet

CRMR72-W
Commercial Series Worktop Refrigerators
© HOSHIZAKI AMERICA, INC.
618 Hwy. 74 S., Peachtree City, GA 30269 • TEL [phone] • FAX [phone] • www.hoshizaki.com
Cabinet Construction
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel.
The cabinet interior back and sides are anodized aluminum with an ABS ceiling and stainless steel floor. Heavy duty epoxy coated installed shelves are standard.
Mounted on anodized aluminum pilasters the shelves are adjustable in ½” increments. Cabinet walls and doors are insulated with 2” of environmentally friendly,
CFC free, foamed in place polyurethane. 6” polyolefin, stem casters (two with brakes) are standard.
Door Construction
Doors are constructed of high grade stainless steel exterior with an ABS interior liner. Hoshizaki’s exclusive “stepped” design protects the gasket while product
is removed from the cabinet. Doors are provided with a one piece, extruded aluminum, flush mount handle. Spring assisted self-closing doors are equipped with
a stay open feature past 90 degrees. Snap-in magnetic door gaskets are durable and easily removed for cleaning. Field reversible door hinging is standard.
Refrigeration System
The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an
energy efficient non-electric evaporation system. A capillary tube controls the flow of environmentally friendly R-134A refrigerant through the evaporator.
Refrigeration system utilizes an “off cycle” defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with an eight foot cord and plug
(20.0 amps or less).
CRMR72-W
FRONT
CRMR72-W
PLAN VIEW
36”
40”
6”
4”
51.5”
7
2”
6
7.75”
30”
9.64”
16”
14.75”
30”
1”
CRMR72-W
SIDE
SIDE
(Cross Section)