Specifications Sheet

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
PLAN VIEW
WF48A-D4
Worktop 48” Freezer with Drawers
30”
48”
40”
4”
36”
6”
1”
40”
19.5”
19.6”
13.2”
26.5”
51”
1”
48”
30”
WF48A-D4
09/26/18
Item # 13432
SIDE VIEW
FRONT VIEW
Cabinet Construction
Drawer Construction
Refrigeration System
The high efficiency refrigeration system is self-contained with an E-coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non-
electric evaporation system. A capillary tube controls the flow of environmentally friendly R290 refrigerant through the evaporator. Unit is provided with an automatic time
initiated heated defrost to remove any ice on the evaporator coil. 115 volt units are equipped with a ten foot cord and plug (20.0 amps or less).
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior
features stainless steel back, sides, and floor with a stainless steel top. One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters
the shelves are adjustable in ½” increments. Cabinet walls are insulated with 2” CFC free, foamed in place polyurethane. 6” polyolefin, stem casters (two with brakes) are
standard.
Drawer fronts are constructed of high grade stainless steel inside and out. Drawers are insulated with 2” free foamed in place polyurethane. TThe bottom drawers will
accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back. The top drawer will accommodate 4” deep pans with either
orientation. The top drawer will also accommodate (1) ½ size pan & (1) 1/3 size pan 6” deep at the front of the drawer opening and provide capacity for (1) ¼ size pan and (1)
1/6 size pan 4” deep in the rear of the drawer. HS-5432 is recommended for this configuration. Drawer frames are formed of 14 gauge stainless steel and securely fastened in
the cabinet. The drawer slides are 16 gauge stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear. The drawer slides
have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. The flush
mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.