Specification Sheet

© HOSHIZAKI AMERICA, INC.
618 Hwy. 74 S., Peachtree City, GA 30269 TEL 800-438-6087 • FAX 800-345-1325 • www.hoshizaki.com
Cabinet Construction
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel.
The cabinet interior back and sides are anodized aluminum with an ABS ceiling and stainless steel floor. Cabinet walls and drawers are insulated with 2” of
environmentally friendly, CFC free, foamed in place polyurethane. 4” polyolefin, stem casters (two with brakes) are standard.
Drawer Construction
Drawer fronts are constructed of high grade stainless steel inside with ABS interior liners and are insulated with R-134a CFC free foamed in place polyurethane.
Each drawer accommodates (1) 12” x 20” x 6” deep pan (pans by others). Drawer frames are formed of 14 gauge stainless steel and securely fastened in the
cabinet. The drawer slides are 16 gauge stainless steel with acetal rollers to prevent metal to metal contact between the drawer slides and reduce wear. The
drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing
significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.
Refrigeration System
The high efficiency refrigeration system is self-contained with an enamel coated evaporator for extended life. Condensate removal is accomplished with an
energy efficient non-electric evaporation system. A capillary tube controls the flow of environmentally friendly R-134A refrigerant through the evaporator.
Refrigeration system utilizes an “off cycle” defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with an eight foot cord and plug
(20.0 amps or less).
CRMR27-D
FRONT
CRMR27-D
Commercial Series Undercounter Refrigerator with Drawers
RIGHT SIDE VIEW
CRMR27-D
PLAN VIEW
3
0”
19.6
1
2
2.75
33.63”
19.6
3
.63”
27”
1
3.2”
49.25”