Specification Sheet

Cabinet Construction
Drawer Construction
Refrigeration System
Front breathing refrigeration system allows unit to be built in to any enclosure with zero side or rear clearance. The high efficiency refrigeration system is self-contained
with an enamel coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non-electric evaporation system. A capillary tube controls
the flow of environmentally friendly R-134a refrigerant through the evaporator. Refrigeration system utilizes a heated defrost to eliminate any ice on the evaporator coil. An
innovative air distribution system distributes air evenly around the pans. Product temperatures are maintained between 33°F and 41°F at 86° ambient room temperature to
comply with N.S.F. 7. Preparation tables are supplied with a full complement of N.S.F. approved plastic 1/6 size pans, 4” deep and stainless steel adapter bars. Units will
also accommodate 6” deep pans. Pans are located 1.5” below the top to keep food product within easy reach. 115 volt units are equipped with an eight foot cord and NEMA
rated plug (20.0 amps or less).
SIDE VIEW
FRONT VIEW
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Printed in the U.S.A.
PLAN VIEW
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. Cabinet is provided with a stainless steel top enclosure and an easily removable
stainless steel insulated lift-up cover. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are anodized aluminum with an ABS
ceiling and stainless steel floor. Cabinet walls and drawers are insulated with 2” of environmentally friendly, CFC free, foamed in place polyurethane. 6” polyolefin, stem casters
(two with brakes) are standard. Preparation tables are supplied with a 60” x 10” x ½” thick N.S.F. approved white polyethylene cutting board.
Drawer fronts are constructed of high grade stainless steel inside with stainless steel interior liners and are insulated with R-134a CFC free foamed in place polyurethane. Each
drawer accommodates (1) full size pan per drawer, 6” deep (pans by others). Drawer frames are formed of 14 gauge stainless steel and securely fastened in the cabinet. The
drawer slides are constructed of heavy duty 16 gauge stainless steel and durable acetal rollers with stainless steel ball bearings to prevent metal to metal contact. The drawer
slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings without showing significant wear. The
flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.
CRMR60-24MD4
CRMR60-24MD4
30”
49.25”
CRMR60-24MD4
1”
CRMR60-24MD4
07/25/16
Item # 13355
CRMR60-24MD4
Commercial Series Mega Top Refrigerator with Drawers
30” 30”
45.25”
9.25”
36”
6”
30” 30”
(24) - 1/6 Size
Pan Capacity
60” x 10” x 1/2” Think
Cutting Board
37.3”
7.63”
1”
53”
19.6”
13.2”