Specifications Sheet

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
PLAN VIEW
SIDE VIEW
FRONT VIEW
13.1”
10.7”
9.4”
37.3”
16.75”
7.75”
21”
13.2”
1”
51”
20.9”
SR60A-24MD2
Mega Top 60” Prep Refrigerator
with One Door and Two Drawers
SR60A-24MD2
11/12/18
Item # 13481
44.25”
8.25”
36”
34”
57.5”
1”
(24) - 1/6 Size
Pan Capacity
60” x 10” x 1/2”
Think Cutting Board
51”
55”
6”
60”
2.5”
2.5”
Cabinet Construction
Refrigeration System
Front breathing refrigeration system allows unit to be built into any enclosure with zero side or rear clearance. The high efficiency refrigeration system is self-contained with an E-coated
evaporator for extended life. Condensate removal is accomplished with an energy efficient non-electric evaporation system. A capillary tube controls the flow of environmentally friendly
R290 refrigerant through the evaporator. Unit uses a heated, time initiated defrost to eliminate any ice on the evaporator coil. An innovative air distribution system distributes air evenly
around the pans. Engineered to maintain NSF-7 temperatures in 100°F ambient. (Certified to NSF-7 temperatures in 86°F ambient.) Preparation tables are supplied with a full complement
of N.S.F. approved plastic 1/6 size pans, 4” deep and stainless steel adapter bars. Units will also accommodate 6” deep pans. Pans are located 1.5” below the top to keep food product
within easy reach. 115 volt units are equipped with a ten foot cord and NEMA rated plug (20.0 amps or less).
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. Cabinet is provided with a stainless steel top enclosure and an easily removable stainless steel
insulated lift-up cover. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are stainless steel with an ABS ceiling and stainless steel floor.
Cabinet walls and drawers are insulated with 2” CFC free, foamed in place polyurethane. 6” polyolefin, stem casters (two with brakes) are standard. Preparation tables are supplied with a
full length, 10” deep x 1/2” thick N.S.F. approved white polyethylene cutting board.
Drawer Construction
Drawer fronts are constructed of high grade stainless steel inside with stainless steel interior liners and are insulated with 2” CFC, foamed in place polyurethane. The bottom drawers
will accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back or left to right. The top drawer will accommodate 4” deep pans with either
orientation. The top drawer will also accommodate 6” deep full-size pans when oriented longways from left to right and provide capacity for (2) ¼ size pans 4” deep in the rear of the
drawer. HS-5433 divider bar is recommended for this configuration. The drawer slides are constructed of heavy duty 16-gauge stainless steel and durable acetal rollers with stainless steel
ball bearings to prevent metal to metal contact. The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and
closings without showing significant wear.
Doors are constructed of high grade stainless steel exterior with an ABS interior liner and are insulated with 2” CFC free, foamed in place polyurethane. Hoshizaki’s exclusive “stepped”
design protects the gasket while product is removed from the cabinet. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Field reversible door
hinging is standard. Doors & drawers are provided with a one piece, extruded aluminum, flush mount handle. Snap-in magnetic door gaskets are durable and easily removed for cleaning.
Door Construction