Specifications Sheet
Cabinet Construction
Refrigeration System
Front breathing refrigeration system allows unit to be built into any enclosure with zero side or rear clearance. The high efficiency refrigeration system is self-contained with an E-coated
evaporator for extended life. Condensate removal is accomplished with an energy efficient non-electric evaporation system. A capillary tube controls the flow of environmentally friendly
R290 refrigerant through the evaporator. Unit uses a heated, time initiated defrost to eliminate any ice on the evaporator coil. An innovative air distribution system distributes air evenly
from beneath the pans. Engineered to maintain NSF-7 temperatures in 100°F ambient. (Certified to NSF-7 temperatures in 86°F ambient.) Preparation tables are supplied with a full
complement of N.S.F. approved polycarbonate plastic 1/6th size pans, 4” deep and stainless steel adapter bars. Rail will also accommodate 6” deep pans. Pans are located 1.5” below
the top to keep food product within easy reach. 115 volt units are equipped with a ten foot cord and NEMA rated plug (20.0 amps or less).
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
PLAN VIEW
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. Cabinet is provided with a stainless steel top enclosure and an easily removable stainless steel
insulated lift-up cover. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are stainless steel with an ABS ceiling and stainless steel floor.
One heavy duty epoxy coated shelf per section is standard. Mounted on anodized aluminum pilasters the shelf is adjustable in 1/2” increments. Cabinet walls are insulated with 2” of
environmentally friendly, CFC free, foamed in place polyurethane. 6” polyolefin, stem casters (two with brakes) are standard. Preparation tables are supplied with a 48” x 10” x 1/2” thick
N.S.F. approved white polyethylene cutting board.
SIDE VIEW
FRONT VIEW
Drawer Construction
Drawer fronts are constructed of high grade stainless steel inside with stainless steel interior liners and are insulated with 2” CFC free, foamed in place polyurethane. The bottom drawers
will accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back. The top drawer will accommodate 4” deep pans with either orientation. The
top drawer will also accommodate (1) ½ size pan & (1) 1/3 size pan 6” deep at the front of the drawer opening and provide capacity for (1) ¼ size pan and (1) 1/6 size pan 4” deep in the
rear of the drawer. HS-5432 is recommended for this configuration.The drawer slides are constructed of heavy duty 16 gauge stainless steel and durable acetal rollers with stainless steel
ball bearings to prevent metal to metal contact. The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and
closings without showing significant wear.
SR48A-18MD4
Mega Top 48” Prep Refrigerator with Drawers
SR48A-18MD4
11/13/18
Item # 13477
40”
44.25”
8.25”
36”
6”
34”
51”
1”
(18) - 1/6 Size
Pan Capacity
48” x 10” x 1/2” Think
Cutting Board
48”
1.5”
2.5”
5.5”
37.3”
16.75”
7.75”
1”
51”
13.2”
21”
13.1”
10.7”
9.4”
20.9”