Specifications Sheet

Cabinet Construction
Refrigeration System
Front breathing refrigeration system allows unit to be built into any enclosure with zero side or rear clearance. The high efficiency refrigeration system is self-contained with an E-coated
evaporator for extended life. Condensate removal is accomplished with an energy efficient non-electric evaporation system. A capillary tube controls the flow of environmentally friendly
R290 refrigerant through the evaporator. Unit uses a heated, time initiated defrost to eliminate any ice on the evaporator coil. An innovative air distribution system distributes air evenly
around the pans. Engineered to maintain NSF-7 temperatures in 100°F ambient. (Certified to NSF-7 temperatures in 86°F ambient.) Preparation tables are supplied with a full complement
of N.S.F. approved plastic 1/6 size pans, 4” deep and stainless steel adapter bars. Units will also accommodate 6” deep pans. Pans are located 1.5” below the top to keep food product
within easy reach. 115 volt units are equipped with a ten foot cord and NEMA rated plug (20.0 amps or less).
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
PLAN VIEW
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. Cabinet is provided with a stainless steel top enclosure and an easily removable stainless steel
insulated lift-up cover. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are stainless steel with an ABS ceiling and stainless steel floor.
Cabinet walls and drawers are insulated with 2” CFC free, foamed in place polyurethane. 6” polyolefin, stem casters (two with brakes) are standard. Preparation tables are supplied with a
full length, 10” deep x 1/2” thick N.S.F. approved white polyethylene cutting board.
SIDE VIEW
FRONT VIEW
Drawer Construction
Drawer fronts are constructed of high grade stainless steel inside with stainless steel interior liners and are insulated with 2” CFC, foamed in place polyurethane. The bottom drawers will
accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back. The top drawer will accommodate 4” deep pans with either orientation. The top
drawer will also accommodate (1) ½ size pan & (1) 1/3 size pan 6” deep at the front of the drawer opening and provide capacity for (1) ¼ size pan and (1) 1/6 size pan 4” deep in the rear
of the drawer. HS-5432 is recommended for this configuration. The drawer slides are constructed of heavy duty 16 gauge stainless steel and durable acetal rollers with stainless steel ball
bearings to prevent metal to metal contact. The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand openings and closings
without showing significant wear.
40”
44.25”
8.25”
36”
6”
34”
51”
1”
(18) - 1/6 Size
Pan Capacity
48” x 10” x 1/2”
Think Cutting Board
48”
51”
1.5”
5.5”
2.5”
Doors are constructed of high grade stainless steel exterior with an ABS interior liner and are insulated with 2” CFC free, foamed in place polyurethane. Hoshizaki’s exclusive “stepped”
design protects the gasket while product is removed from the cabinet. Spring assisted self-closing doors are equipped with a stay open feature past 90 degrees. Field reversible door
hinging is standard. Doors & drawers are provided with a one piece, extruded aluminum, flush mount handle. Snap-in magnetic door gaskets are durable and easily removed for cleaning.
Door Construction
SR48A-18MD2
Mega Top 48” Prep Refrigerator
with One Door and Two Drawers
SR48A-18MD2
11/12/18
Item # 13476
13.1”
10.7”
9.4”
37.3”
16.75”
7.75”
21”
13.2”
1”
51”
20.9”
19.5”
23”