Specifications Sheet

Interior Storage Capacity (CF)
Interior Storage Capacity (CF) (AHAM)
Overall Width x Depth (including 1” bumper)
Height (including 6” casters)
Depth with Cutting Board Installed
Drawer Opening Width x Height
Depth with Drawer Fully Open
(including 1” bumper)
Depth with Door Open at 90° (including 1” bumper)
Pan Capacity (# of 1/6 size x 4” deep)
Adjustable Shelves / Shelf Dimensions W x D
Crated Shipping Weight
Crated Length x Width x Height
Features
Voltage
HACR Breaker
Electrical Connection
(NEMA)
Voltage Range
Ambient Temp. Range
Control Setpoint Range
Amperage
Energy Consumption
(kWh/day) @NSF
Heat Rejection (BTU/Hr.) @NSF
Approx. Nominal Compres. BTU/HR (HP)
Refrigerant / Charge Amount (oz)
2.25” Casters
4” Casters
Stainless steel lift off covers
Additional Epoxy Shelves
Composite cutting board (HS-5267)
Options
Hoshizaki reserves the right to change specifications without notice.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
Valid in United States, Canada, Puerto
Rico and U.S. Territories. Contact
factory for warranty in other countries.
Warranty
3 Year - Parts and Labor on
entire machine.
5 Year - Parts on Compressor
W x D x H
48” x 30” x 44.25”*
*with 6” casters
*
13.66 ft
3
11.95 ft
3
48” x 31”
44.25”
30.7”
19.5” x 23”
50.25”
52.5”
12
1 / 21.25” x 16”
262 lbs.
52.5” x 34” x 45.75”
115/60/1
15.0 Amps
5-15P
104-126
45° to 100°F
32° to 52°F
2.5
3.2
452.3
1354(1/5HP)
R290(2.9 oz)
• Environmentally friendly R290 hydrocarbon refrigerant
• Cabinet, doors, and drawers are insulated with 2” CFC
free, foamed in place polyurethane
• Innovative air distribution system distributes air evenly
to maintain product temperature
• Provided with a full complement of polycarbonate
plastic 1/6th size pans, 4” deep and adapter bars
• Rails will also accept 6” deep pans for 50% more
pan volume
• 48” x 10” x 1/2” thick white polyethylene cutting
board is standard
• Drawer slides are constructed of 16 gauge stainless
steel with acetal rollers
• Drawer frames are formed of 16 gauge stainless steel
and securely fastened in the cabinet
• Top and bottom drawers will accommodate (1) ½ size
pan & (1) 1/3 size pan. In addition, top drawer will
also accommodate (1) ¼ size pan and (1) 1/6 size pan.
Alternate pan orientation (top drawers only) provides (1)
full size pan positioned longways front to back and (3)
1/9 size pans.
• One epoxy coated shelf per door section is standard
• Extruded aluminum flush mount drawer handle
• Magnetic door gasket is easily removable for cleaning
• Removable stainless steel prep guard simplifies cleanup
from accidental rail pan drips and spills.
• E-coated evaporator coil
• Standard with 6” stem casters (two with brakes)
• 10 ft. cord and plug
Note: Made to order. Allow 4-6 weeks.
Engineered to maintain NSF-7
temperatures in 100°F ambient.
(Certified to NSF-7 temperatures in
86°F ambient.)
Stainless steel exterior front, sides
and top with stainless steel interior
sides, back, and floor
Front breathing air flow design
Item #:
Project:
Qty:
AIA#:
Dimensions / Capacity
Two-Section SR48A-12D2
Electrical / Refrigeration
Two-Section SR48A-12D2
*
Stainless steel back
Overshelves
Drawer divider bars
Rail adapter bars
Stainless steel shelves
SR48A-12D2
Sandwich Top 48” Prep Refrigerator
with One Door and Two Drawers
SR48A-12D2
11/14/18
Item # 13475
Door or drawer can be located in any section of the cabinet.
Location must be indicated at time of ordering.