Spec Sheet

Cabinet Construction
Drawer Construction
Refrigeration System
Front breathing refrigeration system allows unit to be built in to any enclosure with zero side or rear clearance. The high efficiency refrigeration system is self-contained with
an E-coated evaporator for extended life. Condensate removal is accomplished with an energy efficient non-electric evaporation system. A capillary tube controls the flow
of environmentally friendly R290 refrigerant through the evaporator. Unit uses a heated, time initiated defrost to eliminate any ice on the evaporator coil. An innovative air
distribution system distributes air evenly around the pans. Engineered to maintain NSF-7 temperatures in 100°F ambient. (Certified to NSF-7 temperatures in 86°F ambient.)
Preparation tables are supplied with a full complement of N.S.F. approved plastic 1/6 size pans, 4” deep and stainless steel adapter bars. Rail will also accommodate 6” deep
pans. Pans are located 1.5” below the top to keep food product within easy reach. 115 volt units are equipped with a ten foot cord and NEMA rated plug (20.0 amps or less).
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com
© HOSHIZAKI AMERICA, INC.
PLAN VIEW
The exterior cabinet top, front, and sides, are constructed of high quality stainless steel. Cabinet is provided with a stainless steel top enclosure and an easily removable stainless
steel insulated lift-up cover. The exterior back and bottom are constructed of coated steel. The cabinet interior back and sides are stainless steel with an ABS ceiling and stainless
steel floor. Cabinet walls and drawers are insulated with 2” of environmentally friendly, CFC free, foamed in place polyurethane. 6” polyolefin, stem casters (two with brakes) are
standard. Preparation tables are supplied with a 27” x 10” x ½” thick N.S.F. approved white polyethylene cutting board.
Drawer fronts are constructed of high grade stainless steel inside and out and are insulated with 2” CFC free, foamed in place polyurethane. The bottom drawers will accommodate
6” deep pans. The bottom drawers will accommodate 6” deep pans. Full size pans in the top drawer can be oriented longways from front to back or left to right. The top drawer will
accommodate 4” deep pans with either orientation. The top drawer will also accommodate 6” deep full-size pans when oriented longways from left to right and provide capacity for
(2) ¼ size pans 4” deep in the rear of the drawer. HS-5433 divider bar is recommended for this configuration. Drawer frames are formed of 16 gauge stainless steel and securely
fastened in the cabinet. The drawer slides are constructed of heavy duty 16 gauge stainless steel with durable acetal rollers with stainless steel ball bearings to prevent metal to metal
contact. The drawer slides have a dynamic load capacity of 175 lbs. and have been life tested (fully loaded) three hundred thousand cycles without showing significant wear. The
flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed for cleaning.
SIDE VIEW
FRONT VIEW
Sandwich Top 27” Prep Refrigerator with Drawers
27”
44.25”
8.25”
36”
6”
22.6”
49.25”
27”
30”
(8) - 1/6 Size
Pan Capacity
27” x 10” x 1/2”
Thick Cutting Board
1”
1.5”
SR27B-8D2
SR27B-8D2
08/24/21
Item # 13591
30.5”
7.75”
1.58”
12.44”
19.69”
43.58”
8.15”
14.7”
9.64”
18.44”
20.32”
22.52”
10.91”
25.5”
22.09”
14.2”