Instruction Manual

18
Your unit requires very lile maintenance. However, periodic cleaning can
help maintain eciency and prolong product life. Remember to disconnect
the power source before cleaning. Remove all products and place them
in another cooler.
1. Clean once a month the condenser with a grease remover. The
c o n d e n s e r i s l o c a t e d i n t h e l o w e r p a r t o f y o u r u n i t , b e h i n d t h e f r o n t g r i l l .
2. Clean the inside and the exterior of your cooler, including the shelves,
with a mild soap soluon. Do not use strong detergents. Wipe dry the
inside of the cooler before loading product again.
3. Let the cooler run with no product load for 2 hours, or let the compressor
complete three on/o cycles to assure that the temperature inside is
appropriate for the products before loading them into the refrigerator.
CLEANING AND PREVENTIVE
MAINTENANCE
ATTENTION
Aer an interrupon of the electrical power supply, the
compressor will take approximately 3 minutes to start
working.
Condenser