Instruction Manual

13
To install casters:
Casters are supplied as oponal equipment. Only use genuine casters or the base
of the cooler might suer damages. When installing the casters it is important to
hand ghten securely against the base rail reinforcement assembly (see image). The
top edge of the caster must make rm contact with the reinforcement assembly.
Each unit requires a 110 Volt individual, properly grounded branch circuit
with a 3 prong grounding type receptacle, protected by a 15 or 20 Amp
circuit breaker or me-delay fuse.
Electrical installaon must be in accordance with Naonal Electrical Codes
and local ordinances.
ELECTRICAL INSTALLATION
Caster
Base rail
NOTE:
Casters with hand-brakes must be placed in FRONT of the unit.
Hand-brake